Hardness compression tensile foam tester
| Minimum | 1 SET |
|---|---|
| Delivery | 15 days after order. |
| Model | HD-F750A |
| Country | China |
| BrandName | HD |
| Package | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
| Payment | L/C, D/P, T/T |
| Price | FOB, CIF |
- Categories
Product Detail
tensile foam tester is a sponge sag, tensile test and tensile machine seal products, sponge, foam can do sag and tensile test, and can do material tensile and press test, widely used in the sponge, foam and other porous compression sunken into the hardness of the elastomer, sag ratio and materials of various physical properties such as tensile and press test.
APPLICATIONS& TEST PURPOSE:
Foam compression tester is used to test material compressed indentation hardness, such as sponge, foam and other porous elastic. Put specimen under pressure plate, the plate compress the specimen with a specify speed until the national standard require concavity, the load cell feedback the pressure to computer, it processing and display, then measure the indentation hardness of sponge, foam and other materials.
Design Standard: ASTM D 3574
Standard Features:
| Control and display | Computer |
| Sensor | Load cell |
| Capacity | 200KG |
| Unit | Kg, N, LB |
| Up plate | Diameter 200mm, bottom fillet R1mm |
| Low plate | 420×420mm, holes diameter 6mm, space 20mm |
| Max stroke | 500mm |
| Test speed | 0~500mm/min |
| Motor | Servo motor |
| Driver | Taiwan high precision ball screw |
| Power | Single phase, 220V, 50Hz |
| Weight | 160KG |
| Dimension | 790×590×1010mm |
| Accessories | One computer with software |
