2000kg Office Vertical 1mm/Min Pressure Test Machine
| Minimum | 1 SET |
|---|---|
| Delivery | 15 days after order. |
| Model | HD-F733-1 |
| Country | China |
| BrandName | HD |
| Package | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
| Payment | L/C, D/P, T/T |
| Price | FOB, CIF |
- Categories
Product Detail
EQUIPMENT DESCRIPTION:
Test rig for chair base is used for the vertical pressure test, destructive test and fatigue test of office chair Ipomoea base (Star Base), repeated pressure loading with setting force and test cycles as the fatigue test. All holding pressure time and cycle number of tests can be adjusted.
STANDARD FEATURES:
| Capacity | 2000kg ( Transcell senor) |
| Unit switch | gf,kgf, N, LBf, W, KN, T |
| Load resolution | 1/250,000 |
| Load accuracy | within ±0.5% |
| Max stroke | 750mm including grip |
| Test speed | (0.01-100)mm/min (computer input) |
| Drive device | imported servo motor |
| Stroke resolution | 0.001 mm |
| Accessories | RS232 with operation software;
one computer(for optional) |
APPLICATION STANDARDS: BIFMA X5.1 2011
BIFMA X5.1 2011 Base Test Procedure:
Remove the casters or glide foot (castors/ glide stems shall remain in place). Caster/ glide stems are required for support. Remove the seat support mechanism and height adjustment mechanism (if applicable) from the base. Apply the load to the vertical support column, or test fixture that simulated the taper/base interface.
a)A force of 11,120 N (2500 lbf.) shall be applied for one minute
b)Remove the force
c)Apply a second force of 11,120 N (2500 lbf.) for one minute
d)Remove the load
