Close this search box.

Product Center

Programmable Vacuum Sand and Dust test Chamber




15 days after order.








Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.


L/C, D/P, T/T



Programmable Vacuum Sand and Dust test Chamber Features

1. Dust Test Chamber Formed using CNC machining box, nice shape, and no reaction by the handle, easy to operate.
2. Imported high grade stainless steel inner tank (SUS304) mirror panels, use of A3 steel box outside the gall spray, increasing the appearance of the texture and cleanliness.
3. Equipment containing dust vertical circulation of air, dust can be reused for testing; device itself has a good sealing performance, test, laboratory test can clearly observe the situation; device equipped with a vacuum system to meet the needs test; equipment dust the bottom of the device can be replaced.
4. Large observation window with bright lights to keep the box, and use of tempered glass embedded heating element, at any time a clear observation box condition.
5. Test with 50mm diameter holes for the external test power line or signal line.


Model HD-E706
Internal dimension 600*600*600mm 800*800*800mm 1000*1000*1000mm
External dimension 1100*900*1650mm 1300*1100*1800mm 1500W*1300D*2000Hmm
Test sample Size W20cm- L30cm-D15cm, weight 0.5kg
Chamber material SUS304 Stainless steel
Specifications of square mesh sieve Mesh hole 75um, mesh metal wire diameter 50um
Talcum powder amount 2kg/ m³
Airflow speed No more than 2m/s
Door Left open door with tempered glass door
Controller PLC Touch Screen controller, programmable to set as below cycle:
Blowing dust time (Stop/Blow) m/s
Cycle time: can be adjusted
Pre-set test time: 0s ~99m99s
Vacuum system Pressure gauge, air filter, Pressure regulating FRL, connecting pipe, Vacuum pump
Vacuum pump capacity 60-600 L/H
Fan Centrifugal fan
Safety protection devices Meter over-temperature function, Phase shortage protection, Power short-circuit protection
Power supply source 3-phase, AC380V±10%,50Hz (can be appointed)



Dust Test Chamber Description

Programmable Vacuum Sand and Dust test Chamber is suitable for testing the enclosure sealing performance of the product, and is mainly used for the IP5X and IP6X tests specified in the enclosure protection level standard. It is mainly to simulate the damage caused by sandstorms to locks, automobile and motorcycle parts, seals, power meters and other products.
Design criteria:
IEC 60529, IPX5/6, GB2423.37, GB4706, GB 4208, GB 10485, GB 7000.1,GJB 150.12, DIN…
1, The machines are safety tested with CE certificate.
2, With control panel and user manuel in English.
3, The valid time of this offer is 30 days, please feedback us upon receipt.

Programmable Vacuum Sand and Dust test Chamber Chamber Structure

1, Chamber material: SUS#304 stainless steel;
2, Transparent window is convenient to observe specimen during testing;
3, Blow fan adopts stainless steel shell, high sealing and wing speed, low noise;
4, Inside the shell is the funnel type, vibration cycle can be adjusted, dust free float in the sky falling to blowing the hole together.

Working condition

1, Temperature: 15~35’C; Relative humidity: 25~75%R.H;
2, Without strong vibration and Electromagnetic effect around;
3, Test chamber should be stable placed and keep balance;
4, Installation place should keep good ventilation, and without strong airflow, high dust and corrosive material.

Send us a Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.


Please fill out the form below to request a quote or to request more information about us. Please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. We’re ready to start working on your new project, contact us now to get started.