Close this search box.
Product Center

Battery Heavy Object Impact Tester








Battery Heavy Object Impact Tester— Haida battery test equipment manufacturer supply crush nail penetration tester, tr


Battery Impact Test Chamber tests the safety performance of battery through different weights from different heights and different stressed area to impact.


The battery of the test sample shall be placed on a flat surface, and a rod with a diameter of 15.8 ± 0.2 mm (5/8 inch) shall be placed on the center of the sample in a crisscross pattern. 9.1kg or 10kg weight dropped from a certain height (610mm or 1000mm) onto the sample.

When a cylindrical or square battery is subjected to an impact test, its longitudinal axis should be parallel to the plane and perpendicular to the longitudinal axis of the steel column. The longest axis of the square battery is perpendicular to the steel column, and the largest surface is perpendicular to the impact direction. Each battery only accepts one impact test. If the battery does not catch fire, it is qualified if it does not explode.


1. UL1642: 2012, UL 2054 “Lithium Battery Standard”
2. UN38.3 “Lithium Batteries and Battery Pack Testing Standard Regulations”
3. IEC62133GB/T 18287-2013 “General Specification for Lithium Ion Batteries for Cellular Phones Heavy Object Impact Test”
4. GB 31241-2014 “Safety requirements for lithium-ion batteries and battery packs for portable electronic products”
5. GB-31241-2014 “Safety Requirements for Lithium Ion Batteries and Battery Packs for Portable Electronic Products”
6. QB/T2502 “General Specification for Lithium Ion Batteries”



Model HD-H206
1. Weight  9.1kg and 10kg;
2. Impact height  0-1000mm (can be set);
3. Height display  LED meter display;
4. Displacement accuracy  ≤±5mm;
5. Impact method  free fall;
6. Control mode  PLC touch screen control;
7. Impact floor material  No. 45 steel, thickness 30 password;
8. Metal rod  15.8±0.2mm (5/8 inch) steel rod;
9. Internal material  SUS#304 stainless steel plate, thickness 1.2mm; Teflon melt adhesive tape is applied to 1/3 of the place, high temperature resistance, corrosion resistance, insulation and easy to clean.
10. External material  cold-rolled sheet baking varnish treatment, thickness 1.5mm;
11. Pressure relief door size  200x200mm;
12. Smoke exhaust pipe  diameter φ100mm, located at the back of the box;
13. Box door  a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;
14. The maximum size of the battery tested  200x200x200mm (width x depth x height);
15. Inner box size  490x520x1430mm (width x depth x height);
16. Dimensions  700x1000x1720mm (width x depth x height, including door lock);
17. Impact method  lift the falling ball to a certain height and release it, and the falling ball falls freely in the vertical direction, without tilting or shaking;
18. Power supply  1∮, AC220V, 3A
19. Power supply power  700W
20. Weight (approximately)  about 270kg