Product Introduction
Xenon Aging Test Chamber adopts xenon arc lamp which can imitate the full spectrum of sunlight to reappear destructive spectral wave that exists in different environment. It can provide the corresponding simulation environment and accelerated test for scientific research, product development and quality control. Xenon lamp aging test chamber can be used for the choice of new materials, improving of existing materials, or the test of evaluating the durability of material composition when it is changed. It can imitate different environmental conditions to observe changes of the materials which were exposed in the sun.
Application Industrial
- Xenon Aging Test Chamber adopts xenon lamp to simulate ultraviolet light, visible light and infrared light in the natural climate to use light to photoaging the product, so as to quickly get the result of whether the product is light resistant. It is mainly suitable for coating, building materials, textiles, furniture leather and other industries.
- Coating: People are placed outdoors, so the shell on the car needs to do a light test to see whether the material of the shell will age under the light for a long time.
- Building materials: can be divided into structural materials, decorative materials and some special materials. Materials exposed to sunlight for a long time need to use xenon lamp aging test chamber to detect the light resistance.
- Textiles: It is easy to understand that the clothes people wear, the curtains at home, etc., need light tests to detect whether they will fade after a long time.
- Furniture leather: A good set of furniture believe that a family will use 40, 50 years, of course, good furniture is also needed to do the test, not only need to do the light test, but also need to do the temperature and humidity test, so as to determine whether the sofa will be peeled after many years of use.
| Item | Specification |
| Internal Dimension (W*D*H) | 700*500*600mm |
| External Dimension (W*D*H) | 1350*1300*1850mm |
| Internal chamber material | SUS 304 # Stainless Steel, anti-rust |
| External chamber material | Cold-rolled steel with spray |
| Chamber humidity range | 55%~90% RH |
| Chamber temperature | 35℃~90℃ |
| Black panel temperature | 45℃~95℃, adjustable |
| Temperature uniformity | ≤±3℃ |
| Filter | Window glass filter / daylight filter |
| Light source | Air cooled long arc xenon lamp |
| Xenon lamp power | 2.5KW * 3pcs = 7.5KW |
| Irradiance strength | 0.51W/m2@340nm |
| Control system | LCD programmable controller,
Auto display irradiance, capacity: 100 groups program, 99 cycles. |
| Illumination time | 1~999 hours, adjustable |
| Water spray system | Water spray time 999 minutes settable
Interval spray time, 1~240 minutes settable |
| Sample holder | Stainless steel, 1pc |
| Distance from sample
holder to lamp |
250~300mm |
| Heating | Nickel-chromium alloy electric heater |
| Humidification power | Stainless steel surface evaporative humidifier |
| Insulation materials | Supper fine glass fiber |
| Temperature sensor | PT100 high precision sensor |
| Air circulation system | Stainless steel centrifugal rotor vane to improve the uniformity of temperature and humidity |
Test Standard
ISO 4892-2
Plastics-Methods of exposure to laboratory light sources-Part 2 :Xenon-arc lamps
ISO 11507
Paints and varnishes -Exposure of coating to artificial weathering -Exposures to fluorescent UV lamps and water
ASTM G155-13
Standard Pratice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM D4459-21
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Application
